Stainless Steel Bars

Supply conditions
SIZE RANGE	5mm – 110mm (3/16″ – 4 1/3″)
FORGED SIZE RANGE	150mm – 400mm (5/90″ – 16″)
LENGTH	Up to 6.5 meters
TOLERANCES	h8, h9, h10, h11, h12, k12, k13, A-484, EN-10060, DIN-1013 etc.
SURFACE FINISH	RA upto 0.2 mm (8.7 RMS)
STRAIGHTNESS	Up to 0.5 mm per meter TIR
GRIT POLISH	K240,K320 or as per customer’s requirement
HEAT TREATMENT	Soft annealing, solution annealing, oil & water quenching, tempering & normalizing
BARS END FINISH	Chamfered ends, 300, 450 & 600 plain ends without burrs or sharp edges
SPECIFICATIONS	As per EN, DIN, JIS, ASTM, BS, ASME, GHOST, AISI/Nace MRO175
Cold drawn, centreless ground, peeled & polished, rough peeled or smooth turned bar
Grade Confirmation through PMI testing with Handheld Spectrometer.
Free from radioactive elements, mercury & lead contamination

Supply Conditions
SIZE RANGE	15mm – 55 mm ( 3/5″ – 2 1/6″)
LENGTH	Up to 6 meters
TOLERANCES	h11, k12, k13
GRIT POLISH	As per customer’s request
HEAT TREATMENT	Solution annealed, oil & water quenched / tempered, soft annealing
BARS END FINISH	Chamfered ends, plain ends without burrs or sharp edges
SPECIFICATIONS	As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
Grade confirmation through PMI testing with handheld spectrometer.
Free from radioactive elements, mercury & lead contamination.

Supply Conditions
SIZE RANGE	12.70 mm – 58 mm (1/2″ to 2-2/7″)
LENGTH	Up to 6 meters
TOLERANCES	h11, k12, k13
GRIT POLISH	As per customer’s request
HEAT TREATMENT	Cold drawn, solution annealed, oil & water quenched / tempered
BARS END FINISH	Chamfered ends, plain ends without burrs or sharp edges
SPECIFICATIONS	As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
Grade confirmation through PMI testing with handheld spectrometer.
Free from radioactive elements, mercury & lead contamination.

Our Products